Rebuilding the Manor - 3.0
- ChrisoftheNorth
- Moderator
- Posts: 47112
- Joined: Thu Nov 03, 2016 6:10 am
- Drives: 4R
Desertbreh wrote: ↑Tue Oct 10, 2017 6:40 pm My guess would be that Chris took some time off because he has read the dialogue on this page 1,345 times and decided to spend some of his free time doing something besides beating a horse to death.
- goIftdibrad
- Chief Master Soft Brain
- Posts: 16746
- Joined: Thu Nov 03, 2016 9:01 am
- Drives: straight past the apex
looks amaze
brain go brrrrrr
- lagunasecaballs
- Meat Patty 2nd Class
- Posts: 353
- Joined: Thu Nov 03, 2016 6:24 am
- Drives: All the E46 M3s
- Melon
- Trollistrator
- Posts: 10884
- Joined: Wed Nov 02, 2016 10:09 pm
- Drives: Blue things, Orange thing
- Location: 2' Underwater
Laser scanning for counter top measurements.
Garage has paint for the first time since it was built in 1975.
Just Kilz primer, I need to go over it with the final coat of exterior paint.
Tub surround.
Going to trim it out with bullnose tile.
Garage has paint for the first time since it was built in 1975.
Just Kilz primer, I need to go over it with the final coat of exterior paint.
Tub surround.
Going to trim it out with bullnose tile.
- Melon
- Trollistrator
- Posts: 10884
- Joined: Wed Nov 02, 2016 10:09 pm
- Drives: Blue things, Orange thing
- Location: 2' Underwater
I'll post pics tomorrow.
This weekend's completed punch list:
-Microwave hung and installed. (Shoutout to and Dubshow) for their muscle.
-Dishwasher brought over, and test fit.
-Drain hose for dishwasher installed.
-Hood vent hooked up.
-Bathroom vents hooked up.
-Changed out two remaining 4k lights to 3.5k.
-Garage cleaned up, plastic picked up from painting.
-Garage outlets installed.
-Finished A/C return air 'alcove'
I am a tired
This weekend's completed punch list:
-Microwave hung and installed. (Shoutout to and Dubshow) for their muscle.
-Dishwasher brought over, and test fit.
-Drain hose for dishwasher installed.
-Hood vent hooked up.
-Bathroom vents hooked up.
-Changed out two remaining 4k lights to 3.5k.
-Garage cleaned up, plastic picked up from painting.
-Garage outlets installed.
-Finished A/C return air 'alcove'
I am a tired
- Calvinball
- Moderator
- Posts: 11184
- Joined: Wed Nov 02, 2016 10:49 pm
- Drives: Pumpkin, Hellcat edition
Once you are done your haus pls come up here and do the stuff I never seem to have time to do with my haus. Kthx.Melon wrote:I'll post pics tomorrow.
This weekend's completed punch list:
-Microwave hung and installed. (Shoutout to and Dubshow) for their muscle.
-Dishwasher brought over, and test fit.
-Drain hose for dishwasher installed.
-Hood vent hooked up.
-Bathroom vents hooked up.
-Changed out two remaining 4k lights to 3.5k.
-Garage cleaned up, plastic picked up from painting.
-Garage outlets installed.
-Finished A/C return air 'alcove'
I am a tired
Sent from the beer depository
- wap
- Chief Master Sirloin of the Wasteful Steak
- Posts: 45297
- Joined: Wed Nov 02, 2016 11:52 pm
- Drives: Blue Meanie
- Location: Pepperland
Melon wrote: ↑Sun Feb 12, 2017 7:57 pm I'll post pics tomorrow.
This weekend's completed punch list:
-Microwave hung and installed. (Shoutout to and Dubshow) for their muscle.
-Dishwasher brought over, and test fit.
-Drain hose for dishwasher installed.
-Hood vent hooked up.
-Bathroom vents hooked up.
-Changed out two remaining 4k lights to 3.5k.
-Garage cleaned up, plastic picked up from painting.
-Garage outlets installed.
-Finished A/C return air 'alcove'
I am a tired
- Melon
- Trollistrator
- Posts: 10884
- Joined: Wed Nov 02, 2016 10:09 pm
- Drives: Blue things, Orange thing
- Location: 2' Underwater
Garage painted
Fancy outlets
Microwave installed, and vent hooked up.
Alcove
Before it was just studs and was pulling air down from the attic, dirty, dusty, and hot air. Bleh!
Board cut and placed in door frame to seal up around the filter.
Fancy outlets
Microwave installed, and vent hooked up.
Alcove
Before it was just studs and was pulling air down from the attic, dirty, dusty, and hot air. Bleh!
Board cut and placed in door frame to seal up around the filter.
- CorvetteWaxer
- Senior Master Sirloin
- Posts: 8381
- Joined: Mon Feb 06, 2017 9:35 pm
- Drives: 1986 Hyundai Excel, 351C swap
- Location: Where it happens every year