Detroit wrote: ↑Wed Dec 13, 2017 10:38 am
I've been getting promo e-mails like crazy from my gas company offering steep discounts on EcoBee. I've given it some serious thought, but as someone that never changes the temp (because it's more efficient for steam), is there really a benefit?
Not to mention, my boiler is currently on an ancient millivolt thermostat system that works even if we lose power. Which does happen from time to time because we have some serious trees around.
I’m going with the Ecobee3lite and two add-on room sensors. I want the ability to control and monitor the heating when I’m away.
I know had some issues with his but he’s got a unique heating system with the oil/heat pump setup.
What is the functional benefit of being able to monitor individual room temps? Unless you have dampers for each room, you can't really control the temp in those rooms. In my case, I can turn down individual radiators (I have the radiator in the room with the t-stat turned down so the rest of the house heats more evenly). If one room is colder than the other, you'll just blast the heat up for the entire house.
I can see it for trouble shooting, but other than that?
Desertbreh wrote: ↑Tue Oct 10, 2017 6:40 pm
My guess would be that Chris took some time off because he has read the dialogue on this page 1,345 times and decided to spend some of his free time doing something besides beating a horse to death.
Detroit wrote: ↑Wed Dec 13, 2017 10:56 am
What is the functional benefit of being able to monitor individual room temps? Unless you have dampers for each room, you can't really control the temp in those rooms. In my case, I can turn down individual radiators (I have the radiator in the room with the t-stat turned down so the rest of the house heats more evenly). If one room is colder than the other, you'll just blast the heat up for the entire house.
I can see it for trouble shooting, but other than that?
They’re temp and occupancy sensors.
Do they make remote-control individual radiator controls? Would keep you from getting up to turn rooms off.
Man I wish I had hot water heat.
My steam heat is so fancy that you can dial down individual radiators, though not remotely. In fact, we noticed that the house was cold yet the dining room (where the thermostat is) was much warmer. I dialed down the radiator in the dining room and now the entire house is more even.
I guess given that, I could benefit from actual data to get more accuracy. But as of now, we just go off of feels and it works.
Desertbreh wrote: ↑Tue Oct 10, 2017 6:40 pm
My guess would be that Chris took some time off because he has read the dialogue on this page 1,345 times and decided to spend some of his free time doing something besides beating a horse to death.
Detroit wrote: ↑Wed Dec 13, 2017 11:21 am
My steam heat is so fancy that you can dial down individual radiators, though not remotely. In fact, we noticed that the house was cold yet the dining room (where the thermostat is) was much warmer. I dialed down the radiator in the dining room and now the entire house is more even.
I guess given that, I could benefit from actual data to get more accuracy. But as of now, we just go off of feels and it works.
So, if you keep your temperature constant and don't mess with stuff often...
Not sure what you'll be gaining.
Does the power go out often?
Usually once per season...so kind of? We have some tall ass trees growing into the power lines that the power company is too cheap to trim...
Desertbreh wrote: ↑Tue Oct 10, 2017 6:40 pm
My guess would be that Chris took some time off because he has read the dialogue on this page 1,345 times and decided to spend some of his free time doing something besides beating a horse to death.
Do they make remote-control individual radiator controls? Would keep you from getting up to turn rooms off.
Man I wish I had hot water heat.
My steam heat is so fancy that you can dial down individual radiators, though not remotely. In fact, we noticed that the house was cold yet the dining room (where the thermostat is) was much warmer. I dialed down the radiator in the dining room and now the entire house is more even.
I guess given that, I could benefit from actual data to get more accuracy. But as of now, we just go off of feels and it works.
Same with hot water. I have the seldom-used guest room turned way down with the door closed because why heat it to the same temp as the rooms we actually use? I also keep the basement rads turned down because it never really gets all that cold down there and the boiler itself bleeds some heat off to the rooms.
Good idea about turning down the rad in the room with the T-stat. Will do that tonight.
Where are these mangos?
Detroit wrote: ↑Fri Apr 16, 2021 1:19 pm
I don't understand anything anymore.
Calvinball wrote: ↑Wed Dec 13, 2017 1:21 pm
How do you adjust individual rads?
Sent from the Beer Depository
Probably with individual knobs.
Actually,
Each rad has a control valve - with a knob - that regulates how much hot water flows through it. Close it and you limit the incoming heated water, open it and you let more hot water pass through it.
Where are these mangos?
Detroit wrote: ↑Fri Apr 16, 2021 1:19 pm
I don't understand anything anymore.
Actually,
Each rad has a control valve - with a knob - that regulates how much hot water flows through it. Close it and you limit the incoming heated water, open it and you let more hot water pass through it.
Yep, that's how mine is but with steam. Which is unique to 2-pipe and the system I have (vapor/vac)...generally turning down a steam radiator results in water hammer.
Desertbreh wrote: ↑Tue Oct 10, 2017 6:40 pm
My guess would be that Chris took some time off because he has read the dialogue on this page 1,345 times and decided to spend some of his free time doing something besides beating a horse to death.
Detroit wrote:I've been getting promo e-mails like crazy from my gas company offering steep discounts on EcoBee. I've given it some serious thought, but as someone that never changes the temp (because it's more efficient for steam), is there really a benefit?
Not to mention, my boiler is currently on an ancient millivolt thermostat system that works even if we lose power. Which does happen from time to time because we have some serious trees around.
No. You don't want one. The latest update makes them play very poorly with boilers. I had to rip mine out.
This is very good to know. They've been tempting me with sub-$100 prices...but I'll stick with what I have because it works fine.
Desertbreh wrote: ↑Tue Oct 10, 2017 6:40 pm
My guess would be that Chris took some time off because he has read the dialogue on this page 1,345 times and decided to spend some of his free time doing something besides beating a horse to death.
This is very good to know. They've been tempting me with sub-$100 prices...but I'll stick with what I have because it works fine.
I loved it till it fucked me over. Really disappointing.
I remember you advocating hard for it. Sad it went south.
Desertbreh wrote: ↑Tue Oct 10, 2017 6:40 pm
My guess would be that Chris took some time off because he has read the dialogue on this page 1,345 times and decided to spend some of his free time doing something besides beating a horse to death.
Actually,
Each rad has a control valve - with a knob - that regulates how much hot water flows through it. Close it and you limit the incoming heated water, open it and you let more hot water pass through it.
Yep, that's how mine is but with steam. Which is unique to 2-pipe and the system I have (vapor/vac)...generally turning down a steam radiator results in water hammer.
Your system allows the condensed steam to flow back down to the boiler, correct? Much better than the steam-venting system, imo.
Where are these mangos?
Detroit wrote: ↑Fri Apr 16, 2021 1:19 pm
I don't understand anything anymore.
Your system allows the condensed steam to flow back down to the boiler, correct? Much better than the steam-venting system, imo.
Seems... smart to have a closed loop, no?
I would think so. The only thing I can think of that a venting system is better at is less of a dry air problem since it dumps steam into the room atmosphere. Otherwise they're noisy and not terribly efficient.
Where are these mangos?
Detroit wrote: ↑Fri Apr 16, 2021 1:19 pm
I don't understand anything anymore.
[user not found] wrote: ↑Wed Dec 13, 2017 2:22 pm
Probably with individual knobs.
Actually,
Each rad has a control valve - with a knob - that regulates how much hot water flows through it. Close it and you limit the incoming heated water, open it and you let more hot water pass through it.
Interesting. I need to check that out. Crank the rad in the drafty room or just lower the one in the room with the stat.
wap wrote:
Actually,
Each rad has a control valve - with a knob - that regulates how much hot water flows through it. Close it and you limit the incoming heated water, open it and you let more hot water pass through it.
Interesting. I need to check that out. Crank the rad in the drafty room or just lower the one in the room with the stat.
Sent from the Beer Depository
Yup, or some combo of both.
Where are these mangos?
Detroit wrote: ↑Fri Apr 16, 2021 1:19 pm
I don't understand anything anymore.
Calvinball wrote: ↑Wed Dec 13, 2017 5:22 pm
Interesting. I need to check that out. Crank the rad in the drafty room or just lower the one in the room with the stat.
Sent from the Beer Depository
Yup, or some combo of both.
I assume it’d be a knob following the ol’ righty tighty lefty loosey rule?
Calvinball wrote: ↑Wed Dec 13, 2017 6:01 pm
In the room itself or down by the boiler? I know I’ve got a number on lines coming off the boiler with knobs on em.
Sent from the Beer Depository
Oh no, at the bottom of each radiator. I'll post a pic tonight.
Here's one of the 2 in my living room:
Sent from my toaster using Crapatalk
Where are these mangos?
Detroit wrote: ↑Fri Apr 16, 2021 1:19 pm
I don't understand anything anymore.
Detroit wrote: ↑Wed Dec 13, 2017 3:13 pm
Yep, that's how mine is but with steam. Which is unique to 2-pipe and the system I have (vapor/vac)...generally turning down a steam radiator results in water hammer.
Your system allows the condensed steam to flow back down to the boiler, correct? Much better than the steam-venting system, imo.
Correct. It's dead silent went operating correctly...whereas a single pipe system with a vent on the radiator will hiss as it vents. They're also more prone to water hammer.
Desertbreh wrote: ↑Tue Oct 10, 2017 6:40 pm
My guess would be that Chris took some time off because he has read the dialogue on this page 1,345 times and decided to spend some of his free time doing something besides beating a horse to death.
wap wrote:
Actually,
Each rad has a control valve - with a knob - that regulates how much hot water flows through it. Close it and you limit the incoming heated water, open it and you let more hot water pass through it.
Interesting. I need to check that out. Crank the rad in the drafty room or just lower the one in the room with the stat.
Sent from the Beer Depository
Do you have hot water or steam heat?
You shouldn't turn down single pipe steam heat...you'll likely end up with water hammer.
Desertbreh wrote: ↑Tue Oct 10, 2017 6:40 pm
My guess would be that Chris took some time off because he has read the dialogue on this page 1,345 times and decided to spend some of his free time doing something besides beating a horse to death.
Your system allows the condensed steam to flow back down to the boiler, correct? Much better than the steam-venting system, imo.
Correct. It's dead silent went operating correctly...whereas a single pipe system with a vent on the radiator will hiss as it vents. They're also more prone to water hammer.
I've heard water hammer. It's no bueno.
Where are these mangos?
Detroit wrote: ↑Fri Apr 16, 2021 1:19 pm
I don't understand anything anymore.